Iron Scrap Processing Equipment Swarf Briquetting Press with 1080 KGF/CM Face Pressure

As part of the briquetting process, coolant is released as the swarf is compressed.This coolant can be reclaimed and reconditioned with a coolant Cleaning Station, which integrates with a briquetting system.

You can reclaim and recondition all of this coolant, making it fit for re-use. our machine will removes particles and trampoil, and controls bacterial growth.

Swarf Briquetting and coolant cleaning combine to produce some fantastic savings and very fast payback, as can be seen in the case studies below:

How does it work?

the Coolant Cleaning System is professional press the waste metal power to be the block,

Pressing copper cake about 120-150 kg / hour, pressed aluminum cake about 100- 120 kg / hour.

The machine is equipped with a screen to control the feeding speed of the machine,

And power consumption of 1.5 degrees / hour. One minute can be pressed 2 cakes. 

1, Applicable material: Aluminum/stainless steel plate/iron/copper
2, Compressed size: ∅70,10-50MM
3, Maximum pressure: 42 Tons
4, Hopper inlet size: 520*450MM
5, Hopper inlet height: 780MM

Our machine could ensure accurate mixing of the metalworking fluids; tight, accurate and repeatable emulsions giving the fluid the best possible start.

By reclaiming used metalworking fluid from a swarfbriquetting process, the Coolant Cleaning System has allowed Senior to reclaim over 20,000 litres of coolant per month.

1. The price of scrap sold after pressed into cakes can be increased by about 15%~30%,
2. the briquette machine workshop warehouse is more clean and beautiful after using the machine.
3. Clean and beautiful, enhance the company's clean image, while contributing to environmental protection.

1.What’s the capacity of the briquette?
The different material the capacity is different. Also we can suggest the suitable model according to your capacity requirements.

2.What is the delivery time of your machine?
In general, the delivery time of our machine is about 15 days, customized machine will be delivered as the negotiation with our clients.

3.Can the machine be customized as our need, such as put on our logo?
Surely our machine can be customized as your need, Put on your logo is also available.

4. As the shipping period will take long time, how can you make sure the machine won’t be broken?
Our machine is film wrapped, to make sure the machine can be delivered to our customer smoothly, we will use the steel wire to fix the machine with the container.